Polypropylene film capacitor
 
Type-SeriesShapePropertiesFeaturesApplicationsDownload

X2 MKP62

X2 MKP62 0.01~10μF
250~330VAC
-40~110℃
P:10~42.5mm
1.Withstand high excess voltage shocks
2.Excellent flame retardant and moisture proof (IEC60384-14Ⅱ)
UL,VDE,ENEC,CQC,ROHS,REACH
Power EMI resistance

MPR CBB21

MPR CBB21 0.01~10μF
100~630VDC
-40~105℃
P:10~32.5mm
1.High frequency and low dissipation factor
2.Low temperature rise inside
3.Excellent flame retardant and moisture proof
1. Widely used in high frequency DC, AC and pulse circuit.
2. Filtering circuit after rectified.

MPB CBB24

MPB CBB24 0.01~3.3μF
100VAC~440VAC
-40~105℃
P:10~32.5mm
1.Low dissipation
2.Low temperature rise inside, High isolation resistance
3.Excellent flame retardant and moisture proof
1. Widely used in reduction voltage products.
2. Carrier signal transmission circuit

MSR CL21X

MSR CL21X 0.001~1.0μF
63~100VDC
-40~105℃
P:5.0/7.5mm
1. Miniature size and light weight.
2.Excellent self-healing and high reliability;
3.Coated with flame retardant epoxy;
Widely used in home appliances, lights, meters, etc.

BME CL233X

BME CL233X 0.001~2.2μF
50~630VDC
-40~105℃
P:5mm
1. Miniature size and light weight.
2.Excellent self-healing and high reliability.
3. Plastic box provide the identical appearance.
By passing, coupling, blocking, pulsing, decoupling, logic, timing, oscillating circuit, and use in low voltage circuit.

MKP-HA

MKP-HA 0.047μF~9.0μF
630V~3000V.DC
-40 to +85℃
1. Low loss and small inherent temperature rise.
2.Withstand high ripple current High DV/DT, absorb high-frequency ripple well.
Widely used in UPS, inverter, welding machine power supply and induction heater.
Especially designed as snubber capacitor for IGBT protection and peak voltage clamp occasions

MKP-C /FC

MKP-C/FC 5μF~100Μf
600V~1400V.DC
-40 to +85℃
1.Low loss and heavy current Low temperature.
2.long lifetime.
3.Excellent active and passive flame resistant circuit.
Widely used in, inverter, power and induction heater.
Connected in series with power output transformer for coupling.

MKP-HR

MKP-HR 0.1μF~10μF
500V~2000V.AC
-40 to +85℃
1.High voltage and heavy current.
2.Low temperature ,long lifetime.
3.Exellent active and passive flame resistant circuit.
Widely used in series or parallel resonant circuit of various intermediate frequency ,high frequency and other electronic Equipment

MKP-FB/ SB

MKP-FB/SB 100μF~10000μF
800V~3000V.DC
-40 to +70°C
1.Low ESR ,high ripple current handling capabilities.
2. Good self-healing properties 3. high ripple current capability.
Used in DC-Link circuits, can replace electrolytic capacitor.
Used in inverters of wind power and solar power ,Welders, Induction heater, UPS, Elevators, Motor driver systems.
Transportation;HEV or EV.

MKP-FS

MKP-FS 100μF~1000μF
600V~1200V.DC
-40 to +85 °C
1.Low ESR, high ripple current handling capabilities.
2. Low temperature, long lifetime.
1.Used in DC-Link circuits/Can replace electrolytic capacitor.
2.Used in inverters of wind power and solar power Welders, Induction heater, UPS, Elevators, Motor driver system, Transportation;HEV or EV.

MKP-FC

MKP-FC 5μF~140μF
500V~1200V.DC
-40 to +85 °C
1.Exellent electric property .
2. Flame retardant plastic case and filled with epoxy resin which standard for ( UL94V-0).
1. Used in DC-Link circuits/Can replace electrolytic capacitor.
2. Used in inverters, industrial and high-end power supplies and solar inverters.

MKP-HS

MKP-HS 0.47μF~9.0μF
630V~3000V.DC
-40 to +85 °C
1.Low loss and small inherent temperature rise .
2.Withstand high ripple current ,high DV/DT, absorb high frequency ripple wave.
Widely used in UPS, inverter, welding machine power supply and induction heater.
Especially designed as snubber capacitor for IGBT protection and peak voltage clamp occasion.

Copyright © 2007-2013 www.csdsz.net All Rights Reserved.
Web Design by Ealltech